Prof. Dr. İSA YEŞİLYURT

Yayın Ağı

Makaleler 17

1. Acoustic Emission Monitoring of Burn Damage Occurring Under Different Grinding Conditions Using the Low-Order Frequency Moments of a Spectrogram

YEŞİLYURT İ.

Journal of Vibration Engineering and Technologies , cilt.11, sa.7, ss.3185-3196, 2023 (SCI-Expanded, Scopus)

2. A comparison of four machine learning techniques and continuous wavelet transform approach for detection and classification of tool breakage during milling process

Demir H. G., YEŞİLYURT İ.

Transactions of the Canadian Society for Mechanical Engineering , cilt.47, sa.1, ss.26-42, 2023 (SCI-Expanded, Scopus)

3. Scalogram-Based Instantaneous Features of Acoustic Emission in Grinding Burn Detection

YEŞİLYURT İ., Dalkiran A., YEŞİL Ö., Mustak O.

Journal of Dynamics, Monitoring and Diagnostics , cilt.1, sa.1, ss.19-28, 2022 (Hakemli Dergi)

4. Monitoring of Burn Damage Occurrence under Different Grinding Conditions Using Acoustic Emission

YEŞİLYURT İ., BAKIR O.

Usak University Journal of Engineering Sciences , cilt.3, sa.2, ss.105-112, 2020 (TRDizin)

5. Modeling and experimental verification of cutting forces in gear tooth cutting

YEŞİLYURT İ., Gursoy H.

Machining Science and Technology , cilt.22, sa.1, ss.30-47, 2018 (SCI-Expanded, Scopus)

6. Estimation of elastic and modal parameters in composites using vibration analysis

YEŞİLYURT İ., Gursoy H.

JVC/Journal of Vibration and Control , cilt.21, sa.3, ss.509-524, 2015 (SCI-Expanded, Scopus)

7. Detection and advancement monitoring of distributed pitting failure in gears

ÖZTÜRK H., YEŞİLYURT İ., SABUNCU M. H.

Journal of Nondestructive Evaluation , cilt.29, sa.2, ss.63-73, 2010 (SCI-Expanded, Scopus)

8. Investigation of effectiveness of some vibration-based techniques in early detection of real-time fatigue failure in gears

ÖZTÜRK H., YEŞİLYURT İ., SABUNCU M. H.

Shock and Vibration , cilt.17, sa.6, ss.741-757, 2010 (SCI-Expanded, Scopus)

9. Vibration analysis of multiple-cracked non-uniform beams

Mazanoglu K., YEŞİLYURT İ., SABUNCU M. H.

Journal of Sound and Vibration , cilt.320, sa.4-5, ss.977-989, 2009 (SCI-Expanded, Scopus)

10. Tool condition monitoring in milling using vibration analysis

YEŞİLYURT İ., ÖZTÜRK H.

International Journal of Production Research , cilt.45, sa.4, ss.1013-1028, 2007 (SCI-Expanded, Scopus)

11. In-plane stability analysis of non-uniform cross-sectioned curved beams

ÖZTÜRK H., YEŞİLYURT İ., SABUNCU M. H.

Journal of Sound and Vibration , cilt.296, sa.1-2, ss.277-291, 2006 (SCI-Expanded, Scopus)

12. An investigation of the effects of measurement noise in the use of instantaneous angular speed for machine diagnosis

Gu F., Yesilyurt İ., Li Y., Harris G., Ball A.

Mechanical Systems and Signal Processing , cilt.20, sa.6, ss.1444-1460, 2006 (SCI-Expanded, Scopus)

13. End mill breakage detection using mean frequency analysis of scalogram

Yesilyurt İ.

International Journal of Machine Tools and Manufacture , cilt.46, sa.3-4, ss.450-458, 2006 (SCI-Expanded, Scopus)

14. Disli Cark Oyukcuk Arizasinin Titresim Analizi ile Tespiti

ÖZTÜRK H., YEŞİLYURT İ., SABUNCU M.

Makine Teknolojileri Elektronik Dergisi (elektronik) , sa.98, ss.72-79, 2004 (TRDizin)

15. The application of the conditional moments analysis to gearbox fault detection - A comparative study using the spectrogram and scalogram

Yesilyurt İ.

NDT and E International , cilt.37, sa.4, ss.309-320, 2004 (SCI-Expanded, Scopus)

16. Fault detection and location in gears by the smoothed instantaneous power spectrum distribution

Yesilyurt İ.

NDT and E International , cilt.36, sa.7, ss.535-542, 2003 (SCI-Expanded, Scopus)

17. Gear tooth stiffness reduction measurement using modal analysis and its use in wear fault severity assessment of spur gears

Yesilyurt İ., Gu F., Ball A. D.

NDT and E International , cilt.36, sa.5, ss.357-372, 2003 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 7

1. DİŞLİ ÜRETİMİNDE KESİCİ TAKIMDA OLUŞAN LOKAL HATANINSINIFLANDIRMA TEKNİKLERİ İLE TESPİTİ

GÜRSOY DEMİR H., YEŞİLYURT İ.

19. Ulusal Makine Teorisi Sempozyumu, Türkiye, 4 - 06 Eylül 2019, (Tam Metin Bildiri)

2. Detection and Location of Tooth Defect in a Two-Stage Helical Gearbox using the Smoothed Instantaneous Power Spectrum

YEŞİLYURT İ., Ball A.

14th International Congress on Condition Monitoring and Diagnostic Engineering Management, Manchester, İngiltere, 04 Eylül 2001, ss.465-472, (Tam Metin Bildiri)

3. Vibration Based Methods in gearbox Fault Detection

YEŞİLYURT İ., Ball A.

Proceedings of the International Conference on Vibration, noise, and Structural Dynamic, 27 - 29 Nisan 1999, (Tam Metin Bildiri)

4. Wavelet Transform Based Feature Extraction Scheme for Automated Rotating Machinery Fatigue Failure Assessment

YEŞİLYURT İ., ENGIN NACI S., BADI M. N.

Proceedings of the Second U.K. Symposium on Applications of Time-Frequency and Time-Scale Methods, University of Warwick, Coventry, 27 - 28 Ağustos 1997, (Tam Metin Bildiri)

5. Detection and Severity Assessment of Bending Fatigue Failure in Spur Gear Teeth using the Continuous Wavelet transform

YEŞİLYURT İ., Ball A.

Proceedings of the 10th International Congress on Condition Monitoring and Diagnostic Engineering Management, 24 - 27 Haziran 1997, (Tam Metin Bildiri)

6. Fault Detection in Helical Gears using Pseudo Wigner-Ville, Instantaneous Power Spectrum, and Choi-Williams Distributions: Part II: Automatic Classification

Ball A., YEŞİLYURT İ.

Proceedings of the 9th International Congress on Condition Monitoring and Diagnostic Engineering Management, 16 - 18 Temmuz 1996, (Tam Metin Bildiri)

7. Fault Detection in Helical Gears using Pseudo Wigner-Ville, Instantaneous Power Spectrum, and Choi-Williams Distributions: Part I: Performance Comparison of Time-Frequency Distributions

YEŞİLYURT İ., Ball A., JACOP P. J.

Proceedings of the 9th International Congress on Condition Monitoring and Diagnostic Engineering Management, 1 - 03 Temmuz 1996, (Tam Metin Bildiri)

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (Scopus)

504

Prof. Dr. İSA YEŞİLYURT

Yayınlar & Eserler

1. Acoustic Emission Monitoring of Burn Damage Occurring Under Different Grinding Conditions Using the Low-Order Frequency Moments of a Spectrogram

2. A comparison of four machine learning techniques and continuous wavelet transform approach for detection and classification of tool breakage during milling process

3. Scalogram-Based Instantaneous Features of Acoustic Emission in Grinding Burn Detection

4. Monitoring of Burn Damage Occurrence under Different Grinding Conditions Using Acoustic Emission

5. Modeling and experimental verification of cutting forces in gear tooth cutting

6. Estimation of elastic and modal parameters in composites using vibration analysis

7. Detection and advancement monitoring of distributed pitting failure in gears

8. Investigation of effectiveness of some vibration-based techniques in early detection of real-time fatigue failure in gears

9. Vibration analysis of multiple-cracked non-uniform beams

10. Tool condition monitoring in milling using vibration analysis

11. In-plane stability analysis of non-uniform cross-sectioned curved beams

12. An investigation of the effects of measurement noise in the use of instantaneous angular speed for machine diagnosis

13. End mill breakage detection using mean frequency analysis of scalogram

14. Disli Cark Oyukcuk Arizasinin Titresim Analizi ile Tespiti

15. The application of the conditional moments analysis to gearbox fault detection - A comparative study using the spectrogram and scalogram

16. Fault detection and location in gears by the smoothed instantaneous power spectrum distribution

17. Gear tooth stiffness reduction measurement using modal analysis and its use in wear fault severity assessment of spur gears

1. DİŞLİ ÜRETİMİNDE KESİCİ TAKIMDA OLUŞAN LOKAL HATANINSINIFLANDIRMA TEKNİKLERİ İLE TESPİTİ

2. Detection and Location of Tooth Defect in a Two-Stage Helical Gearbox using the Smoothed Instantaneous Power Spectrum

3. Vibration Based Methods in gearbox Fault Detection

4. Wavelet Transform Based Feature Extraction Scheme for Automated Rotating Machinery Fatigue Failure Assessment

5. Detection and Severity Assessment of Bending Fatigue Failure in Spur Gear Teeth using the Continuous Wavelet transform

6. Fault Detection in Helical Gears using Pseudo Wigner-Ville, Instantaneous Power Spectrum, and Choi-Williams Distributions: Part II: Automatic Classification

7. Fault Detection in Helical Gears using Pseudo Wigner-Ville, Instantaneous Power Spectrum, and Choi-Williams Distributions: Part I: Performance Comparison of Time-Frequency Distributions

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Tez Danışmanlığı

Açık Erişim