Prof. HAKAN &#199;ALIŞKAN

ERGÜN Y., ÇALIŞKAN H., KARALI H. İ.

International Journal of Hydrogen Energy , vol.179, 2025 (SCI-Expanded, Scopus)

8. Energy and exergy analyses of a solar driven trigeneration system using cascaded ejector-vapor compression refrigeration system for low temperature cooling

Khan Y., Singh P. K., Kumar G., ÇALIŞKAN H., Hong H., Kale U., et al.

Energy , vol.334, 2025 (SCI-Expanded, Scopus)

9. A novel investigation on thermal performance and start-up of pulsating heat pipe at microgravity

Yadav P. S., Gautam R., Bhan S., ÇALIŞKAN H.

Journal of Thermal Analysis and Calorimetry , vol.150, no.18, pp.14615-14632, 2025 (SCI-Expanded, Scopus)

10. Dynamic performance evaluation of a novel evaporative cooling system under variable environmental conditions

Ji Tripathi R., Kumar D., Kumar Singh V., ÇALIŞKAN H., Hong H.

Applied Thermal Engineering , vol.274, 2025 (SCI-Expanded, Scopus)

11. Production and Characterization of Open Cell Cordierite from Boron and Waste Materials by Geopolymer Method for the Emission After Treatment System of Diesel Engines

GLOBAL CHALLENGES , vol.9, no.7, 2025 (SCI-Expanded, Scopus)

12. Thermodynamic, thermoenvironmental, sustainability and aviation performance analyses of aero turbofan jet engine for dual fueled operations

AKDENİZ H. Y., Balli O., ÇALIŞKAN H.

Energy , vol.326, 2025 (SCI-Expanded, Scopus)

13. A case study of sustainable aviation fuel production from scrap tyres

Saracyakupoglu T., Balli O., Aghayeva M., Çalışkan H.

Energy , vol.327, 2025 (SCI-Expanded, Scopus)

14. A comprehensive fracture analysis of a turbojet engine's compressor blade to prevent possible damage

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY , vol.0, no.0, pp.1-9, 2025 (SCI-Expanded, Scopus)

15. Investigating the diesel engine emission performances with various novel emission filters

ÇALIŞKAN H., ERGÜN M. Y., KARALI H. İ., Caglayan H., Hong H., Kale U., et al.

Energy , vol.318, 2025 (SCI-Expanded, Scopus)

16. Oxygenated fuels in acetylene-diesel dual fuel engine: Enhancing performance and emission control

Said Z., Raman R., Garg A., ÇALIŞKAN H., Khan Y., Rashidi M. M.

Energy , vol.317, 2025 (SCI-Expanded, Scopus)

17. Grey-box modelling for estimation of optimum cut point temperature of crude distillation column

Shahzad J., Ahmad I., Ahsan M., Ahmad F., Saghir H., Kano M., et al.

CAAI Transactions on Intelligence Technology , vol.10, no.1, pp.160-174, 2025 (SCI-Expanded, Scopus)

18. Artificial intelligence assisted prediction of optimum operating conditions of shell and tube heat exchangers: A grey‐box approach

Ullah Z., Ahmad I., Samad A., Saghir H., Ahmad F., Kano M., et al.

CAAI Transactions on Intelligence Technology , vol.10, no.0, pp.349-358, 2025 (SCI-Expanded, Scopus)

19. Advanced exergy-based environmental analysis of a cogeneration system used for ceramic industry

Caglayan H., ÇALIŞKAN H., Hong H.

Journal of Thermal Analysis and Calorimetry , vol.150, no.1, pp.345-360, 2025 (SCI-Expanded, Scopus)

20. Impact of hydrogen induction on atomization combustion performance and emissions in diesel engines fueled with heated biodiesel blends

Yadav P. s., Said Z., Gautam R., ÇALIŞKAN H., Wu H.

ENERGY , vol.313, 2024 (SCI-Expanded, Scopus)

21. A Comprehensive analysis of energy, exergy, economic and environment on integrated solarcombined cycle with various HTFs and thermal storage

Khandelwal N., Yadav P. S., Said Z., Sharma M., Shukla A. K., Singh O., et al.

Applied Energy , vol.376, 2024 (SCI-Expanded, Scopus)

22. Improving single-slope passive solar still efficiency through integration of phase change materials and Al2O3 nanoparticles

Khan Y., Said Z., Raman R., Singh P., Mehdi Rashidi M., ÇALIŞKAN H., et al.

Journal of Thermal Analysis and Calorimetry , vol.149, no.21, pp.11807-11816, 2024 (SCI-Expanded, Scopus)

23. Investigating renewable and sustainable biofuel and biofuel/diesel blends utilizations in a turboshaft engine used on helicopters

Energy , vol.306, 2024 (SCI-Expanded, Scopus)

24. Analyzing the influence of feedstock selection in pyrolysis on aviation gas turbine engines: A study on performance, combustion efficiency, and emission profiles

KARALI H. İ., ÇALIŞKAN H.

Energy , vol.306, 2024 (SCI-Expanded, Scopus)

25. Nozzle effects on spray combustion and emissions in compression ignition engines using waste cooking oil biodiesel: A computational fluid dynamics analysis at varying injection pressures

Yadav P. S., Ahmed S. F. A., Gautam R., ÇALIŞKAN H., ÇALIŞKAN N., Hong H.

IET RENEWABLE POWER GENERATION , vol.18, no.14, pp.2340-2359, 2024 (SCI-Expanded, Scopus)

26. Prediction and optimisation of gasoline quality in petroleum refining: The use of machine learning model as a surrogate in optimisation framework

Saghir H., Ahmad I., Kano M., ÇALIŞKAN H., Hong H.

CAAI Transactions on Intelligence Technology , vol.9, no.5, pp.1185-1198, 2024 (SCI-Expanded, Scopus)

27. Exergo-enviro-economic analyses of solar energy based novel air cooling system

Tripathi R. J., Kumar D., Caliskan H., Hong H.

APPLIED THERMAL ENGINEERING , vol.254, pp.1-20, 2024 (SCI-Expanded, Scopus)

28. Advanced exergoeconomic analysis and mathematical modelling of the natural gas fired gas turbine unit used for industrial cogeneration system

Çağlayan H., Çalışkan H., Hong H., Çalışkan N., Kale U., Kilikevičius A.

CASE STUDIES IN THERMAL ENGINEERING , vol.61, no.104969, pp.1-26, 2024 (SCI-Expanded, Scopus)

29. A data-driven multi-objective optimization approach for enhanced methanol yield and exergy loss minimization in direct hydrogenation of CO₂

Samad A., Saghir H., Musawwir A., Ahmad I., ÇALIŞKAN H.

APPLIED THERMAL ENGINEERING , vol.251, 2024 (SCI-Expanded, Scopus)

30. Plant wide modelling and thermodynamic optimization of a petroleum refinery for improvement potentials

Sana A., Ahmad I., Saghir H., Kano M., ÇALIŞKAN H., Hong H.

Process Safety and Environmental Protection , vol.188, pp.64-72, 2024 (SCI-Expanded, Scopus)

31. Prediction and optimization of emissions in cement manufacturing plant under uncertainty by using artificial intelligence-based surrogate modeling

Usman M., Ahmad I., Ahsan M., ÇALIŞKAN H.

ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY , 2024 (SCI-Expanded, Scopus)

32. Energy, exergy, sustainability, thermoeconomic, exergoeconomic, environmental and environmental-economic effects of novel boron-containing open cell geopolymer filter of a diesel engine on exhaust emissions

ENERGY , vol.290, 2024 (SCI-Expanded, Scopus)

33. Thermodynamics, Environmental and Sustainability Impacts of a Turbofan Engine Under Different Design Conditions Considering Variable Needs in the Aviation Industry

Aygun H., Sheikhi M. R., ÇALIŞKAN H.

Global Challenges , vol.8, no.2, 2024 (SCI-Expanded, Scopus)

34. Thermodynamic and exergoenvironmental assessments of solar-assisted combined power cycle using eco-friendly fluids

Khan Y., Raman R., Rashidi M. M., Said Z., ÇALIŞKAN H., Hoang A. T.

Journal of Thermal Analysis and Calorimetry , vol.149, no.3, pp.1125-1139, 2024 (SCI-Expanded, Scopus)

35. Sustainable Power Generation Through Solar-Driven Integration of Brayton and Transcritical CO2 Cycles: A Comprehensive 3E (Energy, Exergy, and Exergoenvironmental) Evaluation

Khan Y., Raman R., Said Z., ÇALIŞKAN H., Hong H.

Global Challenges , vol.8, no.2, 2024 (SCI-Expanded, Scopus)

36. Environmental and second law analysis of a turbojet engine operating with different fuels

Kagan Ayaz S., ÇALIŞKAN H., Altuntas O.

ENERGY , vol.285, 2023 (SCI-Expanded, Scopus)

37. Artificial intelligence based prediction of optimum operating conditions of a plate and fin heat exchanger under uncertainty: A gray-box approach

Khan J. S., Ahmad I., Jadoon U. K., Samad A., Saghir H., Kano M., et al.

International Journal of Heat and Mass Transfer , vol.217, 2023 (SCI-Expanded, Scopus)

38. A comparative study of combined cycles for concentrated solar power for efficient power generation using low Global Warming Potential (GWP) fluids to reduce environmental effects

Khan Y., ÇALIŞKAN H., Hong H.

IET Renewable Power Generation , vol.17, no.16, pp.3741-3754, 2023 (SCI-Expanded, Scopus)

39. Investigating the effects of first idle time and ambient temperature on real driving emissions of passenger cars

Akdag Y. S., Kato A., ÇALIŞKAN H.

AIR QUALITY ATMOSPHERE AND HEALTH , vol.16, no.12, pp.2443-2456, 2023 (SCI-Expanded, Scopus)

40. Exergoeconomic and Thermodynamic Analyses of Solar Power Tower Based Novel Combined Helium Brayton Cycle-Transcritical CO2 Cycle for Carbon Free Power Generation

Khan Y., Singh D., ÇALIŞKAN H., Hong H.

Global Challenges , vol.7, no.12, 2023 (SCI-Expanded, Scopus)

41. Investigation and assessment of the optimum conditions of solar heat source hybrid desiccant cooling system under different modes

Seung D., Min S., ÇALIŞKAN H., Hong H.

Solar Energy , vol.265, 2023 (SCI-Expanded, Scopus) Sustainable Development

42. Maisotsenko Cycle for Heat Recovery in Gas Turbines: A Fundamental Thermodynamic Assessment

Tariq R., ÇALIŞKAN H., Sheikh N. A.

Global Challenges , vol.7, no.11, 2023 (SCI-Expanded, Scopus)

43. Prediction and optimization of exergetic efficiency of reactive units of a petroleum refinery under uncertainty through artificial neural network-based surrogate modeling

Samad A., Ahmad I., Kano M., ÇALIŞKAN H.

Process Safety and Environmental Protection , vol.177, pp.1403-1414, 2023 (SCI-Expanded, Scopus)

44. Utilization of renewable and sustainable aviation biofuels from waste tyres for sustainable aviation transport sector

Tariq R., ÇALIŞKAN H., Sheikh N. A.

Energy , vol.276, 2023 (SCI-Expanded, Scopus) Sustainable Development

45. Environmental and thermoecological comparative assessment of improved humid air waste heat recovery configurations

Journal of Cleaner Production , vol.407, 2023 (SCI-Expanded, Scopus)

46. Thermodynamic analysis and experimental investigation of the water spray cooling of photovoltaic solar panels

Khan Y., Raman R., Rashidi M. M., ÇALIŞKAN H., Chauhan M. K., Chauhan A. K.

Journal of Thermal Analysis and Calorimetry , vol.148, no.12, pp.5591-5602, 2023 (SCI-Expanded, Scopus)

47. Novel investigation on atomization, performance, and emission characteristics of preheated jatropha oil methyl ester and ethyl ester

Yadav P. S., Said Z., Gautam R., Raman R., ÇALIŞKAN H.

ENERGY , vol.270, 2023 (SCI-Expanded, Scopus)

48. Thermodynamic analysis of cumene production plant for identification of energy recovery potentials

Samad A., Saghir H., Ahmad I., Ahmad F., ÇALIŞKAN H.

Energy , vol.270, 2023 (SCI-Expanded, Scopus)

49. Energy, exergy, thermoecologic, environmental, enviroeconomic and sustainability analyses and assessments of the aircraft engine fueled with biofuel and jet fuel

AKDENİZ H. Y., Balli O., ÇALIŞKAN H.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY , vol.148, no.9, pp.3585-3603, 2023 (SCI-Expanded, Scopus)

50. Energy, exergy, economic, environmental, and sustainability assessments of the CFM56-3 series turbofan engine used in the aviation sector

Korba P., Balli O., ÇALIŞKAN H., Al-Rabeei S., Kale U.

Energy , vol.269, 2023 (SCI-Expanded, Scopus)

51. Advanced, extended and combined extended-advanced exergy analyses of a novel geothermal powered combined cooling, heating and power (CCHP) system

ÇALIŞKAN H., Açıkkalp E., Rostamnejad Takleh H., Zare V.

Renewable Energy , vol.206, pp.125-134, 2023 (SCI-Expanded, Scopus)

52. Thermodynamics, environmental damage cost, exergoeconomic, life cycle, and exergoenvironmental analyses of a JP-8 fueled turbodiesel aviation engine at take-off phase

Korba P., Balli O., ÇALIŞKAN H., Al-Rabeei S., Kale U.

CASE STUDIES IN THERMAL ENGINEERING , vol.43, 2023 (SCI-Expanded, Scopus)

53. Aviation, energy, exergy, sustainability, exergoenvironmental and thermoeconomic analyses of a turbojet engine fueled with jet fuel and biofuel used on a pilot trainer aircraft

Balli O., ÇALIŞKAN N., ÇALIŞKAN H.

Energy , vol.263, 2023 (SCI-Expanded, Scopus)

54. Production and Assessment of New Biofuels from Waste Cooking Oils as Sustainable Bioenergy Sources

ÇALIŞKAN H., Yildiz I., Mori K.

ENERGIES , vol.16, no.1, 2023 (SCI-Expanded, Scopus)

55. Prediction of optimum operating conditions of a furnace under uncertainty: An integrated framework of artificial neural network and genetic algorithm

Khan M., Ahmad I., Ahsan M., Kano M., ÇALIŞKAN H.

Fuel , vol.330, 2022 (SCI-Expanded, Scopus)

56. An intelligent sensing system for estimation of efficiency of carbon-capturing unit in a cement plant

Jadoon U. K., Ahmad I., Noor T., Kano M., ÇALIŞKAN H., Ahsan M.

Journal of Cleaner Production , vol.377, 2022 (SCI-Expanded, Scopus)

57. An integrated approach of artificial neural networks and polynomial chaos expansion for prediction and analysis of yield and environmental impact of oil shale retorting process under uncertainty

Qayyum Chohan H., Ahmad I., Mohammad N., Manca D., ÇALIŞKAN H.

Fuel , vol.329, 2022 (SCI-Expanded, Scopus)

58. Environmental impact assessments of different auxiliary power units used for commercial aircraft by using global warming potential approach

Environmental Science and Pollution Research , vol.29, no.58, pp.87334-87346, 2022 (SCI-Expanded, Scopus)

59. Thermodynamic-based environmental and enviroeconomic assessments of a turboprop engine used for freight aircrafts under different flight phases

Dinc A., ÇALIŞKAN H., Ekici S., ŞÖHRET Y.

Journal of Thermal Analysis and Calorimetry , vol.147, no.22, pp.12693-12707, 2022 (SCI-Expanded, Scopus)

60. Thermodynamic-based analyses and assessments of a new-generation turbojet engine used for unmanned aerial vehicles (UAVs)

ŞÖHRET Y., ÇALIŞKAN H.

Journal of Thermal Analysis and Calorimetry , vol.147, no.20, pp.11273-11288, 2022 (SCI-Expanded, Scopus)

61. Performance analysis of PVT systems applicable to apartment housing structures: experiment and simulation

Piao H., ÇALIŞKAN H., Chung J. D., Kim J. H., Hong H.

Journal of Mechanical Science and Technology , vol.36, no.10, pp.5299-5307, 2022 (SCI-Expanded, Scopus)

62. Assessment of a cogeneration system for ceramic industry by using various exergy based economic approaches

AKDENİZ H. Y., Balli O., ÇALIŞKAN H.

Renewable and Sustainable Energy Reviews , vol.167, 2022 (SCI-Expanded, Scopus)

63. Extended exergy analysis of a photovoltaic-thermal (PVT) module based desiccant air cooling system for buildings

Açıkkalp E., ÇALIŞKAN H., Hong H., Piao H., Seung D.

Applied Energy , vol.323, 2022 (SCI-Expanded, Scopus)

64. Evaluating and modelling of thermodynamic and environmental parameters of a gas turbine engine and its components

Aygun H., ÇALIŞKAN H.

Journal of Cleaner Production , vol.365, 2022 (SCI-Expanded, Scopus)

65. Advanced exergy analysis of the turbojet engine main components considering mexogenous, endogenous, exegenous, avoidable and unavoidable exergy destructions

ÇALIŞKAN H., Ekici S., ŞÖHRET Y.

Propulsion and Power Research , vol.11, no.3, pp.391-400, 2022 (SCI-Expanded, Scopus)

66. Energy, exergy, economic, environmental, energy based economic, exergoeconomic and enviroeconomic (7E) analyses of a jet fueled turbofan type of aircraft engine

Fuel , vol.322, 2022 (SCI-Expanded, Scopus)

67. Life cycle assessment based exergoenvironmental analysis of a cogeneration system used for ceramic factories

Sustainable Energy Technologies and Assessments , vol.52, 2022 (SCI-Expanded, Scopus)

68. Analysis of vapor compression refrigeration cycle using advanced exergetic approach with Taguchi and ANOVA optimization and refrigerant selection with enviroeconomic concerns by TOPSIS analysis

Ustaoglu A., Kursuncu B., KAYA A. M., ÇALIŞKAN H.

Sustainable Energy Technologies and Assessments , vol.52, 2022 (SCI-Expanded, Scopus)

69. Sustainability analyses of photovoltaic electrolysis and magnetic heat engine coupled novel system used for hydrogen production and electricity generation

Açıkkalp E., Altuntas O., ÇALIŞKAN H., Grisolia G., Lucia U., Borge-Diez D., et al.

Sustainable Energy Technologies and Assessments , vol.52, 2022 (SCI-Expanded, Scopus) Sustainable Development

70. Energy, exergy, environmental and sustainability assessments of jet and hydrogen fueled military turbojet engine

International Journal of Hydrogen Energy , vol.47, no.62, pp.26728-26745, 2022 (SCI-Expanded, Scopus)

71. Thermal analysis and assessment of phase change material utilization for heating applications in buildings: A modelling

ÇALIŞKAN H., GÜRBÜZ H., ŞÖHRET Y., Ates D.

Journal of Energy Storage , vol.50, 2022 (SCI-Expanded, Scopus)

72. Assessment of biofuels from waste cooking oils for diesel engines in terms of waste-to-energy perspectives

Sustainable Energy Technologies and Assessments , vol.50, 2022 (SCI-Expanded, Scopus)

73. Various thermoeconomic assessments of a heat and power system with a micro gas turbine engine used for industry

Energy Conversion and Management , vol.252, 2022 (SCI-Expanded, Scopus)

74. Environmental and enviroeconomic analyses of two different turbofan engine families considering landing and take-off (LTO) cycle and global warming potential (GWP) approach

Aygun H., ÇALIŞKAN H.

Energy Conversion and Management , vol.248, 2021 (SCI-Expanded, Scopus)

75. Enhanced life cycle modelling of a micro gas turbine fuelled with various fuels for sustainable electricity production

Ayaz S., Altuntas O., ÇALIŞKAN H.

Renewable and Sustainable Energy Reviews , vol.149, 2021 (SCI-Expanded, Scopus)

76. Turbofan engine performances from aviation, thermodynamic and environmental perspectives

Energy , vol.232, 2021 (SCI-Expanded, Scopus)

77. On-design and off-design operation performance assessmentsof an aero turboprop engine used on unmanned aerial vehicles (UAVs) in terms of aviation, thermodynamic, environmental and sustainability perspectives

Energy Conversion and Management , vol.243, 2021 (SCI-Expanded, Scopus)

78. Effects of cordierite particulate filters on diesel engine exhaust emissions in terms of pollution prevention approaches for better environmental management

Journal of Environmental Management , vol.293, 2021 (SCI-Expanded, Scopus)

79. Energy, exergy and environmental assessments of biodiesel and diesel fuels for an internal combustion engine using silicon carbide particulate filter

Journal of Thermal Analysis and Calorimetry , vol.145, no.3, pp.739-750, 2021 (SCI-Expanded, Scopus)

80. Novel combined extended-advanced exergy analysis methodology as a new tool to assess thermodynamic systems

Açıkkalp E., ÇALIŞKAN H., Altuntas O., Hepbasli A.

Energy Conversion and Management , vol.236, 2021 (SCI-Expanded, Scopus)

81. Energy, environment and enviroeconomic analyses and assessments of the turbofan engine used in aviation industry

TUZCU H., ŞÖHRET Y., ÇALIŞKAN H.

Environmental Progress and Sustainable Energy , vol.40, no.3, 2021 (SCI-Expanded, Scopus)

82. Advanced exergy analyses and optimization of a cogeneration system for ceramic industry by considering endogenous, exogenous, avoidable and unavoidable exergies under different environmental conditions

Renewable and Sustainable Energy Reviews , vol.140, 2021 (SCI-Expanded, Scopus)

83. Exergy analysis and nanoparticle assessment of cooking oil biodiesel and standard diesel fueled internal combustion engine

Energy and Environment , vol.31, no.8, pp.1303-1317, 2020 (SSCI, Scopus)

84. VSI: Environment & Energy

ÇALIŞKAN H., Koduru J. R., Acikkalp E., Altuntas O.

Journal of Environmental Management , vol.270, 2020 (SCI-Expanded, Scopus)

85. MOTOR YÜKÜNE BAĞLI OLARAK BİYODİZEL YAKITLI BİR DİZEL MOTORUN ENERJİ VE EKSERJİ ANALİZİ SONUÇLARININ DEĞERLENDİRİLMESİ

YILDIZ İ., ÇALIŞKAN H.

Mühendislik Bilimleri ve Tasarım Dergisi , vol.8, no.3, pp.833-843, 2020 (TRDizin)

86. Güneş Kollektörlerinin Enerji, Ekserji, Termoekolojik, Sürdürülebilirlik, Termoekonomik ve Eksergoekonomik Analizleri

Mühendis ve Makina , vol.61, no.700, pp.228-240, 2020 (TRDizin) Sustainable Development

87. Evaporatif Hava Soğutma Sistemlerinin Enerji, Ekserji, Termoekolojik ve Sürdürülebilirlik Analizleri

Ayaz S. K., Altuntas O., ÇALIŞKAN H.

Tesisat Mühendisliği , vol.179, pp.7-13, 2020 (TRDizin)

88. Assessments of high-efficient regenerative evaporative cooler effects on desiccant air cooling systems

ÇALIŞKAN H., Lee D., Hong H.

Journal of Energy Resources Technology, Transactions of the ASME , vol.142, no.7, 2020 (SCI-Expanded, Scopus)

89. Energy and exergy prices of the jet kerosene fuel with carbon emission equivalents for an aircraft used in the air transport sector in Turkey

Yildiz I., ÇALIŞKAN H.

Aircraft Engineering and Aerospace Technology , vol.93, no.3, pp.457-461, 2020 (SCI-Expanded, Scopus)

90. Thermoecologic assessment and life cycle-based environmental pollution cost analysis of microgas turbine

Journal of Environmental Engineering (United States) , vol.146, no.1, 2020 (SCI-Expanded, Scopus)

91. Thermodynamic assessments of the novel cascade air cooling system including solar heating and desiccant cooling units

ÇALIŞKAN H., Hong H., Jang J. K.

Energy Conversion and Management , vol.199, 2019 (SCI-Expanded, Scopus)

92. Life-Cycle Cost, Cooling Degree Day, and Carbon Dioxide Emission Assessments of Insulation of Refrigerated Warehouses Industry in Turkey

Ozturk H. M., Dombayci O. A., ÇALIŞKAN H.

Journal of Environmental Engineering (United States) , vol.145, no.10, 2019 (SCI-Expanded, Scopus)

93. Environmental pollution cost analyses of biodiesel and diesel fuels for a diesel engine

Yildiz I., Açıkkalp E., ÇALIŞKAN H., Mori K.

Journal of Environmental Management , vol.243, pp.218-226, 2019 (SCI-Expanded, Scopus)

94. Thermodynamic based economic and environmental analyses of an industrial cogeneration system

Applied Thermal Engineering , vol.158, 2019 (SCI-Expanded, Scopus)

95. Thermo-ecological analysis of industrial kilns

Journal of Environmental Management , vol.241, pp.149-155, 2019 (SCI-Expanded, Scopus)

96. Enhanced thermodynamic assessments of the novel desiccant air cooling system for sustainable energy future

ÇALIŞKAN H., Lee D., Hong H.

Journal of Cleaner Production , vol.211, pp.213-221, 2019 (SCI-Expanded, Scopus)

97. Energy, exergy and sustainability assessments of a cogeneration system for ceramic industry

Applied Thermal Engineering , vol.136, pp.504-515, 2018 (SCI-Expanded, Scopus)

98. Energetic and exergetic carbon dioxide equivalents and prices of the energy sources for buildings in Turkey

Yildiz I., ÇALIŞKAN H.

Environmental Progress and Sustainable Energy , vol.37, no.2, pp.912-925, 2018 (SCI-Expanded, Scopus)

99. Thermodynamic, environmental and economic effects of diesel and biodiesel fuels on exhaust emissions and nano-particles of a diesel engine

ÇALIŞKAN H., Mori K.

Transportation Research Part D: Transport and Environment , vol.56, pp.203-221, 2017 (SCI-Expanded, SSCI, Scopus)

100. Environmental and enviroeconomic researches on diesel engines with diesel and biodiesel fuels

Journal of Cleaner Production , vol.154, pp.125-129, 2017 (SCI-Expanded, Scopus)

101. Energy, exergy, environmental, enviroeconomic, exergoenvironmental (EXEN) and exergoenviroeconomic (EXENEC) analyses of solar collectors

Renewable and Sustainable Energy Reviews , vol.69, pp.488-492, 2017 (SCI-Expanded, Scopus)

102. Sustainability assessment of heat exchanger units for spray dryers

Energy , vol.124, pp.741-751, 2017 (SCI-Expanded, Scopus)

103. Environmental, enviroeconomic and enhanced thermodynamic analyses of a diesel engine with diesel oxidation catalyst (DOC) and diesel particulate filter (DPF) after treatment systems

ÇALIŞKAN H., Mori K.

Energy , vol.128, pp.128-144, 2017 (SCI-Expanded, Scopus)

104. Energy and Exergy Analyses of Residential Heating with Electrical Energy

International Journal of Computer Mathematical Science , vol.5, no.10, pp.12-22, 2016 (Peer-Reviewed Journal)

105. Environmental Assessment of Solar Collectors

International Journal of Engineering, Technology, Science and Research , vol.3, no.9, pp.42-45, 2016 (Peer-Reviewed Journal)

106. Thermal Behavior and Energetic Dispersals of Human Body Under Various Indoor Air Temperatures at 50 Relative Humidity

International Journal of Engineering Technology, Management and Applied Sciences , vol.4, no.9, pp.109-115, 2016 (Peer-Reviewed Journal)

107. Low-Exergy (Lowex) analysis of a building with a ground source heat pump

International Journal of Electronics, Electrical and Computational System , vol.5, no.11, pp.15-25, 2016 (Peer-Reviewed Journal)

108. Exergy and Sustainability Assessments of Flat Plate Solar Thermal Collectors

International Journal of Engineering Technology, Management and Applied Sciences , vol.4, no.10, pp.8-12, 2016 (Peer-Reviewed Journal)

109. Novel approaches to exergy and economy based enhanced environmental analyses for energy systems

Energy Conversion and Management , vol.89, pp.156-161, 2015 (SCI-Expanded, Scopus) Sustainable Development

110. Thermodynamic and environmental analyses of biomass, solar and electrical energy options based building heating applications

Renewable and Sustainable Energy Reviews , vol.43, pp.1016-1034, 2015 (SCI-Expanded, Scopus)

111. Energy, exergy, thermoeconomic and sustainability analyses of a building heating system with a combi-boiler

International Journal of Exergy , vol.14, no.2, pp.244-273, 2014 (SCI-Expanded, Scopus)

112. Energy, exergy and sustainability analyses of hybrid renewable energy based hydrogen and electricity production and storage systems: Modeling and case study

Applied Thermal Engineering , vol.61, no.2, pp.784-798, 2013 (SCI-Expanded, Scopus)

113. Isı Değiştiricilerinin Ekserjetik Yönleri Exergetic Aspects of Heat Exchangers

Mühendis ve Makina , vol.54, no.645, pp.28-37, 2013 (TRDizin)

114. Thermoeconomic analysis of a building energy system integrated with energy storage options

Energy Conversion and Management , vol.76, pp.274-281, 2013 (SCI-Expanded, Scopus)

115. Energetic and exergetic comparison of the human body for the summer season

Energy Conversion and Management , vol.76, pp.169-176, 2013 (SCI-Expanded, Scopus)

116. Exergoeconomic and environmental impact analyses of a renewable energy based hydrogen production system

International Journal of Hydrogen Energy , vol.38, no.14, pp.6104-6111, 2013 (SCI-Expanded, Scopus)

117. Letter to Editor: Rebuttal to "some comments to the paper 'Energy, exergy and sustainability analyses of hybrid renewable energy based hydrogen and electricity production and storage systems: Modeling and case study'"

Applied Thermal Engineering , vol.59, no.1-2, pp.480-489, 2013 (SCI-Expanded, Scopus)

118. Exergoeconomic, enviroeconomic and sustainability analyses of a novel air cooler

Energy and Buildings , vol.55, pp.747-756, 2012 (SCI-Expanded, Scopus)

119. Thermodynamic analyses and assessments of various thermal energy storage systems for buildings

Energy Conversion and Management , vol.62, pp.109-122, 2012 (SCI-Expanded, Scopus)

120. Energy and exergy analyses of combined thermochemical and sensible thermal energy storage systems for building heating applications

Energy and Buildings , vol.48, pp.103-111, 2012 (SCI-Expanded, Scopus)

121. A comparative study on energetic, exergetic and environmental performance assessments of novel M-Cycle based air coolers for buildings

Energy Conversion and Management , vol.56, pp.69-79, 2012 (SCI-Expanded, Scopus)

122. Exergetic and sustainability performance comparison of novel and conventional air cooling systems for building applications

ÇALIŞKAN H., Hepbasli A., Dincer I.

Energy and Buildings , vol.43, no.6, pp.1461-1472, 2011 (SCI-Expanded, Scopus)

123. Thermodynamic performance assessment of a novel air cooling cycle: Maisotsenko cycle

ÇALIŞKAN H., Hepbasli A., Dincer I., Maisotsenko V.

International Journal of Refrigeration , vol.34, no.4, pp.980-990, 2011 (SCI-Expanded, Scopus)

124. Exergy analysis and sustainability assessment of a solar-ground based heat pump with thermal energy storage

Journal of Solar Energy Engineering, Transactions of the ASME , vol.133, no.1, 2011 (SCI-Expanded, Scopus)

125. Exergetic cost analysis and sustainability assessment of an Internal Combustion Engine

International Journal of Exergy , vol.8, no.3, pp.310-324, 2011 (SCI-Expanded, Scopus)

126. Energy and exergy prices of various energy sources along with their CO2 equivalents

Energy Policy , vol.38, no.7, pp.3468-3481, 2010 (SCI-Expanded, SSCI, Scopus)

127. Exergetic analysis and assessment of industrial furnaces

ÇALIŞKAN H., TAT M. E., Hepbasli A.

Journal of Energy Resources Technology, Transactions of the ASME , vol.132, no.1, pp.120011-120017, 2010 (SCI-Expanded, Scopus)

128. A review on exergetic analysis and assessment of various types of engines

International Journal of Exergy , vol.7, no.3, pp.287-310, 2010 (SCI-Expanded, Scopus)

129. Energy and exergy analyses of ice rink buildings at varying reference temperatures

ÇALIŞKAN H., TAT M. E., Hepbasli A.

Energy and Buildings , vol.42, no.9, pp.1418-1425, 2010 (SCI-Expanded, Scopus)

130. Exergy analysis of engines fuelled with biodiesel from high oleic soybeans based on experimental values

ÇALIŞKAN H., TAT M. E., Hepbasli A., Van Gerpen J. H.

International Journal of Exergy , vol.7, no.1, pp.20-36, 2010 (SCI-Expanded, Scopus)

131. Performance assessment of an internal combustion engine at varying dead (reference) state temperatures

Applied Thermal Engineering , vol.29, no.16, pp.3431-3436, 2009 (SCI-Expanded, Scopus)

Papers Presented at Peer-Reviewed Scientific Conferences 54

1. Environmental, Environmental-Economic and Global Warming Potential Impacts of a Novel Open Geopolymer Filter Used as an Exhaust After Treatment System of a Diesel Engine

Çalışkan H., Karalı H. İ., Ergün Y.

16th International Istanbul Scientific Research Congress On Life, Engineering, Architecture and Mathematical Sciences, İstanbul, Turkey, 27 February - 28 March 2024, pp.1-7, (Full Text) Sustainable Development

2. Investigation of Exhaust Emissions Improvement Ability of Open Porous Geopolymer Filter with 5% Boron Waste Clay, 5% Zirconium Oxide and Zirconium Sulfate Additives in Exhaust After-Treatment System

Çalışkan H., Karalı H. İ., Ergün Y.

16th International Istanbul Scientific Research Congress On Life, Engineering, Architecture and Mathematical Sciences, İstanbul, Turkey, 28 February - 29 March 2024, pp.1-7, (Full Text) Sustainable Development

3. INVESTIGATING GEOPOLYMER FOAM STRUCTURES ENHANCED WITH BORON WASTE CLAY

ERGÜN Y., ÇALIŞKAN H., KARALI H. İ.

5th INTERNATIONAL AZERBAIJAN CONGRESS ON LIFE, ENGINEERING, AND APPLIED SCIENCES, 24 - 26 January 2024, (Full Text)

4. Development of geopolymer-based cordierite and investigation of its use as an exhaust filter

Ergün Y., Çalışkan H., Karalı H. İ.

5th International Azerbaijan Congresses on Life, Engineering, Mathematical, and Applied Sciences, Baku, Azerbaijan, 24 January - 26 March 2024, pp.134-141, (Full Text) Sustainable Development

5. ENERGY ANALYSIS OF THE 5% BORON BASED AFTER TREATMENT SYSTEM INTEGRATED DIESEL ENGINE UNDER DIFFERENT SPEEDS

KARALI H. İ., ÇALIŞKAN H., ERGÜN Y.

ABANT 2nd INTERNATIONAL CONFERENCE ON SCIENTIFIC RESEARCHES, Bolu, Turkey, 28 - 30 December 2023, pp.860-869, (Full Text)

6. EXPERIMENTAL ANALYSIS AND ASSESSMENT OF 5% BORON CONTAINING OPEN CELL GEOPOLYMER FILTER ON DIESEL ENGINE EMISSIONS

KARALI H. İ., ÇALIŞKAN H., ERGÜN Y.

ABANT 2nd INTERNATIONAL CONFERENCE ON SCIENTIFIC RESEARCHES, Bolu, Turkey, 28 - 30 December 2023, pp.870-877, (Full Text)

7. Determination of Production Processes of ASTM-Compliant Bio-jet Fuel from Waste Tyre Feedstock

GÜNERHAN A., ALTUNTAŞ Ö., ÇALIŞKAN H.

The 6th International Conference on Alternative Fuels, Energy & Environment (ICAFEE 2023): Future and Challenges, Kayseri, Turkey, 6 - 08 October 2023, pp.415-416, (Summary Text)

8. A COMPREHENSIVE REVIEW OF THE IMPACT OF FEEDSTOCK CHOSEN IN THE PYROLYSIS PROCESS ON THE EMISSIONS OF GAS TURBINE ENGINES

GÜNERHAN A., ALTUNTAŞ Ö., ÇALIŞKAN H.

11th Global Conference on Global Warming (GCGW-2023), İstanbul, Turkey, 14 - 16 June 2023, pp.43-47, (Full Text)

9. TAMAMEN ELEKTRİKLİ BİR ARABANIN ULUSLARARASI UYUMLU HALE GETİRİLMİŞ HAFİF ARAÇLAR TEST PROSEDÜRÜ (WLTP) İLE ÖLÇÜLMÜŞ ENERJİ TÜKETİMİNİN İNCELENMESİ

Kaplan E. M., ÇALIŞKAN H.

Anadolu 11 th International Conference on Applied Science, Diyarbakır, Turkey, 29 - 30 December 2022, pp.657-661, (Full Text)

10. Physical and Chemical Exergy Analyses of the Gas Turbine Combustion Chambers Used for The Aviation Sector

TUZCU H., ÇALIŞKAN H.

2nd International Congress on Scientific Advances (ICONSAD 2022), İstanbul, Turkey, 21 - 24 December 2022, pp.437-442, (Full Text)

11. Comparison of the Ranges of a Fully Electric Car Measured by the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) and Real Driving Emission (RDE) Procedure (Tamamen Elektrikli Bir Arabanın Uluslararası Uyumlu Hale Getirilmiş Hafif Araçlar Test Prosedürü (WLTP) ve Gerçek Sürüş Emisyonu (RDE) Prosedürü ile Ölçülmüş Menzillerinin Karşılaştırılması)

Kaplan E. M., ÇALIŞKAN H.

2nd International Congress on Scientific Advances (ICONSAD 2022), İstanbul, Turkey, 21 - 24 December 2022, pp.585-589, (Full Text)

12. Use of ASTM Certified Alternative Jet Fuels in Aviation Gas Turbine Engines

GÜNERHAN A., ALTUNTAŞ Ö., ÇALIŞKAN H.

Aviation In The XXI-st Century 2022, KYIV, Ukraine, 28 - 30 September 2022, pp.15-19, (Full Text)

13. The Effect of Operating a Diesel Engine Using Diesel Fuel and Biofuel at Different Engine Loads on Energy Efficiency Values

International Conference on Energy, Environment and Storage of Energy (ICEESEN 2022), Kayseri, Turkey, 1 - 03 September 2022, pp.135-138, (Full Text) Sustainable Development

14. The Comparison of the Change in Soot Emission Concentration of a Diesel Engine According to Fuel Type and Engine Load

6th International Conference on Innovative Studies of Contemporary Sciences (6. Tokyo Summit), Tokyo, Japan, 1 - 02 August 2022, pp.143-147, (Full Text)

15. Investigation of NOx Emissions in Real Driving Conditions of a Spark Ignition Engine Under Different Conditions

AKDAĞ Y. S., ÇALIŞKAN H.

6th International Congress On Life, Social, And Health Sciences In A Changing World, İstanbul, Turkey, 2 - 03 July 2022, pp.384-387, (Full Text)

16. The effect of operating a diesel engine in different exhaust after treatment systems on fuel consumption

International Korkut Ata Scientific Researches Conference, Osmaniye, Turkey, 28 - 30 June 2022, pp.567-570, (Full Text)

17. Evaluation of THC and CO driving emissions in real conditions of an internal combustion engine car in different environmental conditions

AKDAĞ Y. S., ÇALIŞKAN H.

5th international "Başkent" congress on physical, social and health sciences, İstanbul, Turkey, 11 - 12 June 2022, pp.542-546, (Full Text)

18. Investigation of exhaust emissions of a diesel engine operated with specific biodiesel fuel using Diesel Oxidation Catalyst (DOC) as an after treatment system

5th international "Başkent" congress on physical, social and health sciences, İstanbul, Turkey, 11 - 12 June 2022, pp.599-602, (Full Text)

19. Assessment of energy analysis results of a diesel engine using DOC after treatment system depending on fuels

6th International Conference on Advances in Mechanical Engineering (ICAME 2021), İstanbul, Turkey, 20 - 22 October 2021, pp.438-444, (Full Text)

20. Variation of fuel consumption and total particle concentrations of renewable biofuel and fossil diesel fuel depending on engine loads

ÇALIŞKAN H., YILDIZ İ., Mori K.

4. International Conference on Life and Engineering Sciences (ICOLES 2021), İstanbul, Turkey, 23 - 25 September 2021, pp.112-122, (Full Text)

21. The effect of the DOC after treatment system on emission gases released by combustion of diesel fuel in a diesel engine

AKDENİZ H. Y., Ballı Ö., ÇALIŞKAN H.

4. International Conference on Life and Engineering Sciences (ICOLES 2021), İstanbul, Turkey, 23 - 25 September 2021, pp.104-111, (Full Text)

22. MULTI-OBJECTIVE OPTIMIZATION OF A MULTISTAGE VAPOR COMPRESSION REFRIGERATION CYCLE

USTAOĞLU A., KURŞUNCU B., KAYA A. M., ÇALIŞKAN H.

TUBA World Conference on Energy Science and Technology (TUBA WCEST-2021), Turkey, 8 - 12 August 2021, pp.321-322, (Full Text)

23. THERMO-ENVIRONMENTAL PERFORMANCE ASSESSMENTS OF A MEDIUM-SCALE AERO TURBOJET ENGINE

TUBA World Conference on Energy Science and Technology (TUBA WCEST-2021), Turkey, 8 - 12 August 2021, pp.259-260, (Full Text)

24. Comparison of diesel no 2 fuel with new biodiesel fuel from waste oils in terms of fuel properties

8th International Conference on Renewable Fuels, Combustion and Fire (FCE’21), Ankara, Turkey, 5 - 07 March 2021, pp.98-102, (Full Text)

25. Investigation of Combustion of Kerosene Fuel Used in Aviation

TUZCU H., ÇALIŞKAN H.

15th International Combustion Symposium, Kayseri, Turkey, 17 - 19 September 2020, pp.75-79, (Full Text)

26. Comparison of The Emissions of Diesel and Waste Derived Biofuel Under 100 Nm Engine Load

15th International Combustion Symposium, Kayseri, Turkey, 17 - 19 September 2020, pp.428-432, (Full Text)

27. Hybrid Nuclear/Renewable-Thermal System

Second Consultancy Meeting to Develop the Nuclear Energy Series Document on Nuclear–Renewable Hybrid Energy Systems, Viyana, Austria, 16 - 19 December 2019, (Full Text) Sustainable Development

28. Nuclear-Renewable Hybrid Energy Systems – IAEA Activities

Haneklaus N., Gaber H., Berthelemy M., Kim Y., Tucek K., Arif A., et al.

International Conference on Climate Change andthe Role of Nuclear Power, Vienna, Austria, 7 - 11 October 2019, (Full Text)

29. Develop the Content for Nuclear Energy Series on Nuclear–Renewable Hybrid Energy Systems: Turkey Perspective

AYAZ S. K., ALTUNTAŞ Ö., ÇALIŞKAN H.

1st Consultancy Meeting to Develop the Nuclear Energy Series on Nuclear-Renewable Hybrid Energy Systems, Vienna, Austria, 11 - 14 February 2019, (Full Text)

30. Pollution Cost Assessments of a Diesel Engine

YILDIZ İ., AÇIKKALP E., ÇALIŞKAN H., Mori K.

The International Symposium inEnvironmental Science and Industrial Ecology (ISESIE 2018), Bangkok, Thailand, 11 - 12 December 2018, (Full Text)

31. Pollution cost assessment of a gas turbine

The International Symposium in Environmental Science and Industrial Ecology (ISESIE 2018), Bangkok, Thailand, 11 - 12 December 2018, (Full Text)

32. Thermodynamic based ecologic assessment of a kiln

AYAZ S. K., ALTUNTAŞ Ö., ÇALIŞKAN H.

The International Symposium in Environmental Science and Industrial Ecology (ISESIE 2018), Bangkok, Thailand, 11 - 12 December 2018, (Full Text)

33. Environmental assessments of a micro gas turbine

The International Symposium in Environmental Science and Industrial Ecology (ISESIE 2018), Bangkok, Thailand, 11 - 12 December 2018, (Full Text)

34. Emission Nanoparticle Assessments and Exergetic Comparisons of Cooking Oil Biodiesel and Standard Diesel Fuels Used for Internal Combustion Engine

Ayaz S. K., Altuntas O., ÇALIŞKAN H.

The International Symposium in Environmental Science and Industrial Ecology (ISESIE 2018), Bangkok, Thailand, 11 - 12 December 2018, (Full Text)

35. Effect of ammonia fuel fraction on the exergetic performance of a gas turbine

4th International Symposium on Hydrogen Energy, Renewable Energy and Materials, HEREM 2018, Bangkok, Thailand, 13 - 14 June 2018, vol.144, pp.150-156, (Full Text) Sustainable Development

36. Performance assessment of the proton exchange membrane fuel cell - Chemical heat pump hybrid system

Açikkalp E., ÇALIŞKAN H.

4th International Symposium on Hydrogen Energy, Renewable Energy and Materials, HEREM 2018, Bangkok, Thailand, 13 - 14 June 2018, vol.144, pp.125-131, (Full Text)

37. Thermo-Ecologic Evaluation of a Spray Dryer for Ceramic Industry

Caglayan H., ŞÖHRET Y., ÇALIŞKAN H.

4th International Symposium on Hydrogen Energy, Renewable Energy and Materials, HEREM 2018, Bangkok, Thailand, 13 - 14 June 2018, vol.144, pp.164-169, (Full Text)

38. Thermodynamic analysis and nanoparticle assessment of Japanese diesel no 2 fueled truck engine

4th International Symposium on Hydrogen Energy, Renewable Energy and Materials, HEREM 2018, Bangkok, Thailand, 13 - 14 June 2018, vol.144, pp.104-110, (Full Text) Sustainable Development

39. Investigation of the energy recovery in the burners of the ceramic factory kiln

4th International Symposium on Hydrogen Energy, Renewable Energy and Materials, HEREM 2018, Bangkok, Thailand, 13 - 14 June 2018, vol.144, pp.118-124, (Full Text)

40. Thermodynamic Comparison of Various Spray Dryers for Ceramic Industry

International Conference on Engineering Technologies (ICENTE’17), Konya, Turkey, 7 - 09 December 2017, pp.921-925, (Full Text)

41. Energy and Exergy Analysis of a Heat Generation Unit for the Spray Dryer

International Advanced Researches Engineering Congress-2017, Osmaniye, Turkey, 16 - 18 November 2017, pp.226-230, (Full Text)

42. Thermodynamic Assessment of a Gas Turbine for the Ceramic Factory

International Advanced Researches Engineering Congress-2017, Osmaniye, Turkey, 16 - 18 November 2017, pp.221-225, (Full Text)

43. Energy and Exergy Analyses of HVAC Systems

ÇALIŞKAN H., Hong H.

2017 SAREK Annual Conference, Pyeongyang, North Korea, 21 - 23 June 2017, (Full Text)

44. The Effect of Evaporator Effectiveness on Unit Exergy Cost of Electricity Generated by an Organic Rankine Cycle

Uysal C., Özcan H., ÇALIŞKAN H., Kwak H., Kurt H., Hong H.

2017 SAREK Annual Conference, Pyeongyang, North Korea, 21 - 23 June 2017, (Full Text)

45. Low Exergy Lowex analysis of a building with a ground source heat pump

2nd International Conference on Innovative Trends in Engineering Science and Technology (ICITESM-16), YMCA, Jai Singh Road, Delhi, India, India, 19 November 2016, (Full Text)

46. Exergy and Sustainability Assessments of Flat Plate Solar Thermal Collectors

6th International Conference on Innovative Research in Engineering Science and Management (ICIRESM-16), The Institution of Electric and Telecommunication Engineers (IETE), Lodhi Road, New Delhi, Delhi, India, India, 09 October 2016, (Full Text)

47. Energy and Exergy Analyses of Residential Heating with Electrical Energy

48. Thermal Behavior and Energetic Dispersals of Human Body Under Various Indoor Air Temperatures at 50 Relative Humidity

3rd International Conference on Recent Innovation in Science, Technology and Management (ICRISTM-16), Indian Federation of United Nations Associations (IFUNA) C-6, Qutab Institutional Area, New Delhi, India, India, 18 September 2016, (Full Text)

49. Environmental Assessment of Solar Collectors

ÇALIŞKAN H., DİNÇER İ., HEPBAŞLI A.

50. A thermodynamic study on renewable energy based hydrogen production and storage systems

International Conference on Hydrogen Production (ICH2P-2011), Thessaloniki, Greece, 19 June 2011 - 22 June 2010, vol.0, pp.1-12, (Full Text)

51. Exergetic assessment of a thermal energy storage system coupled with a solar ground heat pump

ÇALIŞKAN H., HEPBAŞLI A., DİNÇER İ.

5th International Ege Energy Symposium and Exhibition (IEESE-5), Denizli, Turkey, 27 - 30 June 2010, vol.0, (Full Text)

52. Exergy cost analysis of a diesel engine fueled with various fuels

Global Conference on Global Warming 2009 (GCGW-2009), İstanbul, Turkey, 5 - 09 July 2009, vol.0, pp.862-871, (Full Text)

53. Comparing the energetic and exergetic prices of various energy sources for the Turkish residential and industrial applications

ÇALIŞKAN H., ÖZTÜRK H. K.

1st International Exergy, Life Cycle Assessment and Sustainability WorkshopSymposium (ELCAS), NISYROS, Greece, 4 - 06 June 2009, vol.8, (Full Text)

54. Güneş Takip Sistemlerinin İncelenmesi

2. Ulusal Güneş ve Hidrojen Enerjisi Kongresi (UGHEK-2008), Eskişehir, Turkey, 12 - 13 June 2008, vol.151, pp.96-111, (Full Text)

Books 15

1. Advanced sensors, monitoring, and control systems for environmental sustainability

Ahmad I., Zulfiqar A., Shabbir M., Khan J. S., Çalışkan H., Hong H.

Elsevier Science, Oxford/Amsterdam , Oxford, 2025

2. Smart Cities and Sustainable Manufacturing

Raman R., Çalışkan H., Said Z.

Elsevier Science, Oxford/Amsterdam , Oxford, 2025

3. Principles and frameworks of sustainable manufacturing

Ahmad I., Shabbir M., Zulfiqar A., Khan J. S., Çalışkan H., Hong H.

Elsevier Science, Oxford/Amsterdam , Oxford, 2025

4. A Novel Concept for Enviro-Sustainability Assessments of Aircraft Jet Engines Under Different Fueled Conditions

Akdeniz H. Y., Ballı Ö., Çalışkan H.

Springer, London/Berlin , London, 2025

5. Advanced sensors, monitoring, and control systems for environmental sustainability

Ahmad I., Zulfiqar A., Shabbir M., Salah Khan J., Çalışkan H., Hong H.

in: Smart Cities and Sustainable Manufacturing: Innovations for a Greener Future, Roshan Raman,Hakan Caliskan,Zafar Said, Editor, Elsevier Science, Oxford/Amsterdam , Oxford, pp.47-55, 2025

6. Principles and frameworks of sustainable manufacturing

Ahmad I., Shabbir M., Zulfiqar A., Salah Khan J., Çalışkan H., Hong H.

in: Smart Cities and Sustainable Manufacturing: Innovations for a Greener Future, Roshan Raman,Hakan Caliskan,Zafar Said, Editor, Elsevier Science, Oxford/Amsterdam , Oxford, pp.1-7, 2025

7. Chapter 10 - Biofuels combustion in internal combustion engines

ÇALIŞKAN H., YILDIZ İ., Mori K.

in: Advances in Biofuels Production, Optimization and Applications, Mejdi Jeguirim, Antonis A. Zorpa, Editor, ELSEVIER, pp.185-205, 2024

8. Nuclear-renewable Hybrid Energy Systems

Bragg-Sitton S., ÇALIŞKAN H., Debelak K., Gaber H., Haneklaus N., Jevremovic T., et al.

International Atomic Energy Agency (IAEA), Viyana, 2022 Sustainable Development

9. HYBRID NUCLEAR-RENEWABLE ENERGY SYSTEMS FOR SUSTAINABILITY AND CLIMATE CHANGE MITIGATION IN TURKEY

in: Nuclear–Renewable Hybrid Energy Systems for Decarbonized Energy Production and Cogeneration, International Atomic Energy Agency, Editor, International Atomic Energy Agency Publishing Section, VİYANA, pp.37-50, 2019

10. Binaların Performansının Değerlendirilmesinde Ekserjetik Yaklaşımların Kullanılması ve Binalarda Ekserji Yönetimi

HEPBAŞLI A., UTLU Z., BALTA M., ÇALIŞKAN H., YILDIRIM ÖZCAN N., YÜCER C.

TMMOB Makina Mühendisleri Odası [12. Ulusal Tesisat Mühendisliği Kongresi], İzmir, 2015

11. Buz Pisti Yapilarinin Enerjetik ve Ekserjetik Analizi ve Değerlendirilmesi

ÇALIŞKAN H., DINCER I., HEPBAŞLI A.

in: Binaların Performansının Değerlendirilmesinde Ekserjetik Yaklaşımların Kullanılması ve Binalarda Ekserji Yönetimi, , Editor, TMMOB, Makina Mühendisleri Odası [12. Ulusal Tesisat Mühendisliği Kongresi], İzmir, pp.69-83, 2015

12. Assessment of Maisotsenko Combustion Turbine Cycle with Compressor Inlet Cooler

in: Progress in Clean Energy Volume 1 Analysis and Modeling, Dincer, I., Colpan, C.O., Kizilkan, O., Ezan, M.A. , Editor, SPRINGER, pp.41-55, 2015

13. ISI KAYBI KAZANCI HESABINDA EKSERJİ BAZLI YENİ YAKLAŞIMLAR YARININ BİNALARININ EKSERJETİK VE EKSERGOEKONOMİK BAKIMDAN OPTİMUM TASARIMI

HEPBAŞLI A., UTLU Z., BALTA M., KALINCI Y., ÇALIŞKAN H., YÜCER C.

TMMOB, MAKİNA MÜHENDİSLERİ ODASI [11. UlusalTesisat Mühendisliği Kongresi], İzmir, 2013

14. Environmental Impact Assessment of Various Energy Storage Options for Buildings

ÇALIŞKAN H., DİNÇER İ., HEPBAŞLI A.

in: Causes Impacts and Solutions to Global Warming, Dincer, Ibrahim; Colpan, Can Ozgur; Kadioglu, Fethi, Editor, SPRINGER, New York, pp.1091-1142, 2013 Sustainable Development

15. Buz Pisti Yapilarinin Enerjetik ve Ekserjetik Analizi ve Değerlendirilmesi