Surface plasmon resonance chemical sensor modified with α-naphthylmethacrylate nano thin film for chloroform detection


Creative Commons License

AÇIKBAŞ Y.

Research on Engineering Structures and Materials, cilt.10, sa.3, ss.885-895, 2024 (Scopus) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 10 Sayı: 3
  • Basım Tarihi: 2024
  • Doi Numarası: 10.17515/resm2023.57ma1027rs
  • Dergi Adı: Research on Engineering Structures and Materials
  • Derginin Tarandığı İndeksler: Scopus, TR DİZİN (ULAKBİM)
  • Sayfa Sayıları: ss.885-895
  • Anahtar Kelimeler: Chemical sensor, Langmuir-Blodgett nano thin film, Surface plasmon resonance, Swelling dynamic, α-Naphthylmethacrylate
  • Uşak Üniversitesi Adresli: Evet

Özet

The research on the rapid and sensitive detection of pollution caused by the products and technologies used has recently attracted attention in the literature. In the detection of volatile organic compounds (VOCs), polymers/monomers are used in the production of sensitive, fast-responding, reversible thin-film gas sensor elements. In this work, the monomer α-Naphthylmethacrylate was selected as thin film sensor element. The α-Naphthylmethacrylate-based nano thin films were prepared with technique of LB. Monomer LB thin films fabricated onto gold-coated glass substrate to investigate their vapour sensing properties by using Surface Plasmon Resonance (SPR) optical technique. This prepared monomer-based thin film sensor exposed to five different concentrations of chloroform vapors varying between 13.98x103-69.9x103 ppm and the sensor response values were recorded. Swelling dynamics’ of this monomer thin film sensor was also illuminated by using Fick's early-time diffusion law. Diffusion coefficients of α-Naphthylmethacrylate LB thin film sensor materials exposed to the five different concentrations of chloroform vapor were calculated with the help of reflected light intensity graph data and Fick's Law as a function of time. It was determined that the diffusion coefficient values of the first and second slope regions as varying between 5.72x10-17-21.97x10-17 cm2s-1 and 3.06x10-17-6.25x10-17 cm2s-1, respectively. SPR kinetic measurement results showed that α-Naphthylmethacrylate material is promising for the detection of chloroform vapor.