THE EFFECTS OF WOODEN DOWEL SPECIES AND THE END DISTANCE OF MINIFIX FASTENER ON THE SHEAR FORCE CAPACITY FOR H-TYPE FURNITURE JOINTS

Creative Commons License

Karaman A.

WOOD AND FIBER SCIENCE, cilt.56, sa.1, ss.1-8, 2024 (SCI-Expanded)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 56 Sayı: 1
  • Basım Tarihi: 2024
  • Doi Numarası: 10.22382/wfs-2024-01
  • Dergi Adı: WOOD AND FIBER SCIENCE
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, CAB Abstracts, Chemical Abstracts Core, Compendex, Veterinary Science Database
  • Sayfa Sayıları: ss.1-8
  • Uşak Üniversitesi Adresli: Evet

Özet

Effects of the wooden dowel species and edge distances were studied relative to the shear force capacities of H-type furniture joints with minifix fastener under loadings. Melamine-coated mediumdensity fiberboard (MDF-Lam), minifix fasteners, and wooden dowels were used for specimens as used in the furniture industry. H-type joint specimens were tested in shear force. These compression tests were applied to 60 pieces of test samples prepared for this study based on the principles of ASTM D 1037-06 (2010). According to the results, the highest shear force capacities were obtained for the beech dowel. According to edge distances from end distances, the highest shear force capacities were obtained at 72 mm distance from the edge. In the manufacturing of wood composite based H type furniture, the highest shear force capacity values were obtained with the edge distance of 72 mm with an oak dowel combination (1649 N), while the edge distance of 90 mm with a beech dowel combination (1405 N) gave the lowest shear force capacity values. Furthermore, it was concluded that oak dowel as a substance and the distance 72 mm from the edge as distance could be recommended.